Backflow Testing in Houston, TX for Overdue Notices, Failed Tests and New Assemblies, Tested, Repaired and Filed With the City
Primary Plumbing Services: Tested and Filed With the City
Updated November 2026
Primary Plumbing Services handles backflow testing in Houston, TX for commercial buildings, apartments, restaurants and homes with irrigation. The test is done by a TCEQ-licensed tester registered with the City, and a passing report goes in through SwiftComply.
Annual tests usually run $100-$250+ per assembly, and repairs usually run $200-$900+. Call 713-643-7228.
- Annual and overdue tests scheduled fast.
- Results submitted through SwiftComply.
- Failed devices repaired and retested.
- New assemblies installed and tested.
- Family owned since 1986, BBB A+ accredited since 2001.
Schedule a Backflow Test
Fast callbackBusinesses: restaurants, high rises, retail, offices and multi-family.
Tell us what's happening and our office will call you back. Emergency? Call 713-643-7228, 24/7.
- Family Owned Since 1986
- Commercial and Residential
- 24/7 Emergency Plumbing
- Clear Estimates Before Work Starts
"We had a leak at our water meter and had the city come out to look. Found out the break was at the meter but on our side of the service. We have had Primary work on our commercial projects before and this being on first plumbing issue at our home, they did an awesome job! It's wasn't an immediate issue so didn't expect it but they took care of us and came out the same day and fix the issue. Being it Houston it is hot so respect to the workers!"
Teddy Tran , Google review
About Primary Plumbing Services
Ruben Munoz, PresidentPrimary Plumbing Services has been independently owned and operated by the Munoz family since 1986. The leadership team includes Ruben Munoz, President; Ruben Alex Munoz, Vice President of the Service Division; Melissa Gonzalez, Vice President of Business Development; and Andrew Gonzalez, Vice President of the New Construction Division.
Related services
Primary Plumbing Services Tested and Filed With the City
New copper water piping with a brass valve runs along a block wall outside a building.
Who Can Test a Backflow Preventer in Houston?
Registered Backflow Testers
In the City of Houston, a backflow assembly has to be tested by someone who holds a current TCEQ Backflow Prevention Assembly Tester license, works for a testing company registered with the City's Cross Connection Control Program and uses calibrated test equipment. A regular plumbing license alone isn't enough.

| Houston Requirement | What It Means |
|---|---|
| TCEQ tester license | The person testing is licensed by the state |
| City registration | The testing company is on the City's list |
| Calibrated gauges | The test kit is checked for accuracy |
| Fire sprinkler lines | Need a state-approved fire line contractor |
Properties served by a MUD or another water district follow that district's program instead.
How Much Does Backflow Testing Cost in Houston?
How Backflow Testing Is Priced
Backflow testing in Houston usually costs $100-$250+ per assembly, including the City submission. Large assemblies, hard access and several devices on one property change the price. Repairs and replacements are priced separately after the test.

| Backflow Service (Houston, 2026) | Typical Range |
|---|---|
| Annual test, per assembly | $100-$250+ |
| Residential irrigation test | $100-$200+ |
| Repair after a failed test | $200-$900+ |
| Retest after repair | $75-$150+ |
| Small assembly replaced | $1,500-$4,500+ |
| Large assembly replaced | $3,500-$8,000+ |
What Should I Ask Before Booking a Test?
- Is the City submission included?
- Will you upload the report through SwiftComply?
- What if the device fails?
- Can you repair and retest the same day?
- Will I get a copy of the report?
How Do Backflow Test Results Get to the City of Houston?
How Results Are Filed With the City
The testing company submits the report through SwiftComply, the City's reporting system, within two business days of the test. Your property only gets credit once a passing report is submitted and accepted. You don't upload it yourself.

- Tester records the assembly details.
- Tester runs the test and fills out the report.
- Report is uploaded through SwiftComply.
- City reviews and accepts it.
- You get a copy for your records.
What Happens If My Backflow Preventer Fails?
Repair, Retest and Filing After a Failed Test
A failed test means the property stays out of compliance until a passing report is filed. The assembly gets repaired with the right parts or replaced, tested again, and the passing report is submitted. Common causes are worn seals, stuck check valves and a leaking relief valve.

| Failure Cause | Usual Fix |
|---|---|
| Worn seals or rubber | Repair kit and retest |
| Stuck or fouled check valve | Clean or replace parts |
| Relief valve dumping water | Rebuild the relief valve |
| Freeze cracked body | Replace the assembly |
| Old or obsolete model | Replace the assembly |
What If I Ignore an Overdue Notice?
The City warns that noncompliance can bring citations of up to $2,000 a day and possible suspension of water service. Schedule the test and keep the report.
Backflow Preventer Installation and Replacement
Installation Followed by Certified Testing
A new or replacement backflow assembly in Houston has to be tested right after it's installed, and the passing results submitted to the City before it counts. We install the right assembly for the hazard, then test and file it.

- Right assembly for the hazard.
- Tested right after install.
- Freeze covers for exposed devices.
- Annual reminders after that.
For full equipment installs, see commercial plumbing installation.
Frequently Asked Questions About Backflow Testing in Houston
Common Questions From Property Owners
How often does a backflow preventer need testing?
Every year, and right after it's installed, replaced or repaired.
Does my home irrigation system need a test?
If it has a backflow assembly on City water, usually yes. Check your notice.
Will my water be shut off during the test?
Briefly, usually 15 to 30 minutes per assembly.
Can you test several devices in one visit?
Yes. Multi-device properties are tested and filed together.
Do you handle grease traps for restaurants too?
Yes. See grease trap services.
Do you work on restaurant plumbing beyond backflow?
Yes. See restaurant plumbing.
Backflow Testing Near You in Houston
Serving Houston From Our Office Near Ellington Field
The Primary Plumbing Services crew work out of 11700 Playa Ct near Ellington Field. See Houston plumber near Ellington Field.

Reviewed by Ruben Munoz, President, Primary Plumbing Services
Call Primary Plumbing Services for Backflow Testing in Houston
Schedule Backflow Testing
Test, repair and file. Call 713-643-7228.
Contact Us
We will get back to you as soon as possible.
Please try again later.
