Faucet and Fixture Installation in Houston, TX for the Fixtures You Picked Out, With New Shutoffs and a Leak Test on Every Connection
Primary Plumbing Services: Professional Fixture Installation
Updated November 2026
Primary Plumbing Services does faucet and fixture installation in Houston, TX for fixtures you bought or ones we supply. We swap old shutoff valves when they're seized, check that shower trim matches the valve in the wall, and leak test every connection.
Kitchen faucets usually run $175-$300+ in labor, and bathroom faucets usually run $125-$225+ each. Call 713-643-7228 to bundle your fixtures.
- Your fixtures or ours, both welcome.
- Seized shutoff valves replaced on the spot.
- Shower trim matched to the valve before we start.
- Several fixtures, one visit and one price.
- Family owned since 1986, BBB A+ accredited since 2001.
Book Fixture Installation
Fast callbackHomes: leaks, drains, water heaters, softeners, repipes and sewer lines.
Tell us what's happening and our office will call you back. Emergency? Call 713-643-7228, 24/7.
- Family Owned Since 1986
- Commercial and Residential
- 24/7 Emergency Plumbing
- Clear Estimates Before Work Starts
"new valves under kitchen sink"
Ofelia McCulloch , Google review
About Primary Plumbing Services
Ruben Munoz, PresidentPrimary Plumbing Services has been independently owned and operated by the Munoz family since 1986. The leadership team includes Ruben Munoz, President; Ruben Alex Munoz, Vice President of the Service Division; Melissa Gonzalez, Vice President of Business Development; and Andrew Gonzalez, Vice President of the New Construction Division.
Related services
Primary Plumbing Services Professional Fixture Installation
A brass pull-down kitchen faucet and drain.
What Does a Houston Plumber Charge to Install Fixtures?
How Fixture Installation Is Priced
Fixture installation in Houston usually costs $125-$300+ per faucet in labor, and $150-$300+ for shower trim on an existing valve. Doing several in one visit costs less per fixture. Replacing the valve inside the wall, or seized shutoffs under the sink, adds to it.

| Fixture (Houston, 2026) | Typical Labor |
|---|---|
| Kitchen faucet | $175-$300+ |
| Bathroom vanity faucet | $125-$225+ |
| Shower trim on existing valve | $150-$300+ |
| New shower valve in the wall | $400-$900+ |
| Undermount or drop-in sink | $200-$450+ |
| Pot filler, line already run | $200-$400+ |
| Shutoff valve replaced | $75-$150+ each |
| Kitchen faucet plus two vanities plus shower trim | $575-$1,050+ |
Can I Buy My Own Faucet and Have You Install It?
Installing Fixtures You Purchase
Yes. Many Houston homeowners buy fixtures from a showroom or online and have us install them. We check the box before we start: the right number of holes, the right valve for the trim, and all the parts. If something's missing, we tell you before your water's off.

- Hole count matches the sink or counter.
- Deck plate included if you need one.
- Shower trim is the same brand and series as the valve.
- Supply lines fit your shutoffs.
- Drain assembly included with vanity faucets.
Will My New Shower Trim Fit My Old Valve?
Only if it's made for that valve. Shower trim is brand and series specific: a Moen trim won't fit a Delta valve, and even within a brand, cartridges change. Take a photo of the old trim and the valve behind it before you shop, or let us check.
Shower Trim or a New Shower Valve: What's the Difference?
Comparing Shower Trim and Valve Replacement
Shower trim is the handle, plate and spout you see. The valve is the mixing body inside the wall. Swapping trim on a working valve is quick. Replacing the valve means opening the wall or tile from behind, and in Houston that work may need a permit.

| Trim Only | New Valve | |
|---|---|---|
| What changes | Handle, plate, spout, head | Valve body in the wall |
| Wall opened | No | Yes, often from behind |
| Labor | $150-$300+ | $400-$900+ |
| Fixes temperature swings | No | Yes, with a pressure-balancing valve |
| When it makes sense | Valve works, same brand | Old two- or three-handle, leaks, scalding |
Should I Hire a Plumber or a Handyman to Install Fixtures?
When Fixture Work Requires a Plumber
A handyman can swap a simple faucet. Hire a plumber when shutoffs are corroded, when a shower valve or trim is involved, when you're installing several fixtures, or when you want one company accountable for every connection.

- Old shutoffs that won't close or break when turned.
- Shower valve replacements in the wall.
- Several fixtures on one job.
- Leak testing and a single point of contact.
- Licensed plumber, verifiable with the state.
Frequently Asked Questions About Fixture Installation in Houston
Common Questions About Fixture Installation
Do you haul away old fixtures?
Yes, on request.
Do you install toilets?
Yes. See toilet repair and installation.
Can you install a bidet seat?
Yes, and we add a tee at the toilet supply.
My faucet has one hole but my sink has three. Now what?
Use the deck plate that came with the faucet, or we can source one.
Do you install garbage disposals too?
Yes. See garbage disposal installation.
Doing a full remodel instead?
See remodel plumbing.
Fixture Installation Near You in Houston
Serving Houston From Our Office Near Ellington Field
Our plumbers work out of 11700 Playa Ct near Ellington Field. See Houston plumbing repair.

Reviewed by Ruben Munoz, President, Primary Plumbing Services
Call Primary Plumbing Services for Fixture Installation in Houston
Schedule Fixture Installation
Bring the fixtures, we bring the valves and the leak test. Call 713-643-7228. Primary Plumbing Services has been a family owned plumbing company in Houston since 1986.
Contact Us
We will get back to you as soon as possible.
Please try again later.
